| Title |
Author |
Affiliation |
Date |
| High-Throughput Characterization Tools/Algorithms To Outline Porosity Variability in AM Samples as a Function of Processing Conditions |
Amir Ziabari, et al. |
Oak Ridge National Laboratory |
February 2025 |
| Preliminary Results of Molten Salt Corrosion of High Entropy Alloys Manufactured at INL |
Robert A. Roach, Priyanshi Agrawal, Michael J. Moorehead, Qiufeng Yang, Ruchi Gakhar |
Idaho National Laboratory |
February 2025 |
| Peregrine Software Development: Report on the Code Conversion From Python to C++ |
Jerome Benoit, Luke Scime, Vincent Paquit |
Oak Ridge National Laboratory |
September 2024 |
| Development of Refractory Alloys and Refractory Coatings for Advanced Nuclear Reactors |
Bryant Alan Kanies, et al. |
Los Alamos National Laboratory |
September 2024 |
| Evaluation of Directed Energy Deposition and Laser Powder Bed Fusion Nickel-Based Alloys Process Application Envelopes Based on Performance, Process Economics, Supply Chain Risks, and Reactor-Specific Targeted Components |
Sebastien Dryepondt, Holden Hyer, Amir Ziabari, Asa Monson, et al. |
Oak Ridge National Laboratory |
September 2024 |
| Nuclear Structural Component Relevant Properties of Nickel-Based Alloys Produced via Additive Manufacturing |
Asa Monson, Michael Mulholland, Tate Patterson, and Michael McMurtrey |
Idaho National Laboratory |
August 2024 |
| Complete Optimization of Laser Powder Bed Fusion Nickel-Based Alloys Downselected from FY 2023 Candidate Materials Including Thermodynamic Modeling, Sample Fabrication, and Microstructure Characterization |
Sebastien Dryepondt, et al. |
Oak Ridge National Laboratory |
July 2024 |
| Evaluation of DED and LPBF Fe-based Alloys Process Application Envelopes based on Performance, Process Economics, Supply Chain Risks, and Reactor-specific Targeted Components |
Isabella van Rooyen, et al. |
Pacific Northwest National Laboratory |
September 2024 |
| Laser Powder Bed Fusion of Steels for Nuclear Applications |
Srinivas Aditya Mantri, Xuan Zhang, Wei-Ying Chen |
Argonne National Laboratory |
August 2024 |
| Studies on Printability Methodologies and Directed-Energy-Deposition-Fabricated Iron Alloys for Nuclear Applications |
Subhashish Meher, et al. |
Pacific Northwest National Laboratory |
August 2024 |
| Creep-Fatigue Properties of Additional 316H PM-HIP Materials Fabricated from Different Powder Compositions and Processing Routes |
Tate Patterson and Yanli Wang |
Idaho National Laboratory |
September 2024 |
| Mechanical Performance of Additively Manufactured ODS 316L and 316H Stainless Steels |
T. S. Byun, D. A. Collins, H. C. Hyer, Y. R. Lin, K.L. Epps, K.M. Krogh |
Oak Ridge National Laboratory |
September 2024 |
| Preliminary Characterization and Evaluation on ShAPE Manufactured 316H and ODS Steels |
Isabella van Rooyen, et al. |
Pacific Northwest National Laboratory |
September 2024 |
| Advanced Manufacturing Techniques and Compositions of High Entropy Alloys for Nuclear Applications |
Mohan Sai Kiran Kumar Yadav Nartu, Subhashish Meher, Isabella van Rooyen, David Garcia, Tianhao Wang, Jorge F Dos Santos, Shalini Tripathi, Nathan Canfield |
Pacific Northwest National Laboratory |
August 2024 |
| Assessment of preliminary results of baseline high entropy alloys manufactured at INL |
Michael McMurtrey, Priyanshi Agrawal, Crewse Petersen, and Michael Moorehead |
Idaho National Laboratory |
July 2024 |
| Summary: Nuclear Energy Critical Material Waste Reduction and Supply Chain Solutions Enabled by Advanced Manufacturing |
Isabella van Rooyen, Carolyn Burns |
Pacific Northwest National Laboratory |
September 2024 |
| Development Results on Replacement Materials for Current Scarce or High Supply Chain Risk Materials |
Carolyn Burns, et al. |
Pacific Northwest National Laboratory |
August 2024 |
| Nuclear Energy Critical Material Waste Minimization Enabled by AM Techniques |
Isabella van Rooyen, et al. |
Pacific Northwest National Laboratory |
May 2024 |
| Process–Property–Performance Mapping of Additively Manufactured 316H Stainless Steel Components |
Caleb Massey, et al. |
Oak Ridge National Laboratory |
September 2024 |
| Technical basis for understanding the process-microstructure-property correlation in LPBF 316 SS |
Xuan Zhang, Lin Gao, Srinivas Aditya Mantri |
Argonne National Laboratory |
September 2024 |
| Development of Additive Manufacturing Agnostic Process Parameter Procedure, 316H Stainless Steel Readiness Level Data Sets, and Machine Maintenance Plan |
Robin Montoya, et al. |
Los Alamos National Laboratory |
September 2024 |
| FY24 Integrated Results for High-Temperature Mechanical Testing of LPBF 316H Stainless Steel |
Xuan Zhang, et al. |
Argonne National Laboratory |
September 2024 |
| Development of Accelerated High-Temperature Mechanical Testing Techniques |
Ninad Mohale, Charles Payne, and Michael McMurtrey |
Idaho National Laboratory |
September 2024 |
| Report on technical development in ANL for innovative creep testing and measurement |
Xuan Zhang, John Snitzer, Edward Listwan |
Argonne National Laboratory |
June 2024 |
| Results of Post-Process NDE Using Advanced Techniques on AM Parts |
Robert O. Montgomery, et al. |
Pacific Northwest National Laboratory |
September 2024 |
| Evaluation of In-Situ AM Process Monitoring Techniques and Potential for Detecting Process Anomalies and Undesirable Microstructures |
Holden C. Hyer, Brandon J. Schreiber, Daniel C. Sweeney, Christian M. Petrie |
Oak Ridge National Laboratory |
July 2024 |
| Simulating the effect of grain structure and porosity on creep for powder bed fusion 316H |
Sagar Bhatt, Shahmeer Baweja, Zuotao Zeng, Mark C. Messner |
Argonne National Laboratory |
September 2024 |
| Deliver a quantified measure of the effects of stress on precipitation in AM 316H SS |
K. Dang, L. Capolungo |
Los Alamos National Laboratory |
September 2024 |
| Preliminary Results on Process Modeling Tools for Determining Variability in Additively Manufactured Stainless Steel 316 Parts, |
Gerry Knapp, John Coleman, Matt Rolchigo, Benjamin Stump, Alex Plotkowski |
Oak Ridge National Laboratory |
August 2024 |
| Multiscale and Machine Learning Modeling for Process-informed Microstructure Prediction in Additively Manufactured Materials Using MALAMUTE |
Sudipta Biswas, Somayajulu L. N. Dhulipala, Peter German, Andrea M. Jokisaari, Dewen Yushu, and Michael D. McMurtrey |
Idaho National Laboratory |
August 2024 |
| FY 2024 Multidimensional Data Correlation Platform Data Management Infrastructure Progress: Materials Laboratory |
Sarah Graham, Stephanie Cooper, Vincent Paquit |
Oak Ridge National Laboratory |
September 2024 |
| FY 2024 Multidimensional Data Correlation Platform: Unified Software Architecture For Advanced Materials And Manufacturing Technologies Data Management And Processing |
Stephanie Cooper et al. |
Oak Ridge National Laboratory |
September 2024 |
| In-situ and ex-situ characterization of irradiated AM materials |
Wei-Ying Chen, et al. |
Argonne National Laboratory |
September 2024 |
| Defect Production and Microstructural Feature Impact for Radiation Damage in Additively Manufactured 316 Stainless Steel |
Andrea M. Jokisaari, Sourabh Bhagwan Kadambi, Sanjoy K. Mazumder, Mathew Swisher, and W. Tanner Yorgason |
Idaho National Laboratory |
July 2024 |
| Development of a MOOSE-based Crystal Plasticity Model with Irradiation Defect Evolution for Irradiation Creep in 316 Stainless Steel |
Sanjoy K. Mazumder and Stephanie A. Pitts |
Idaho National Laboratory |
July 2024 |
| Report on the Integration of Experimental and Modeling Data for Initial Equivalence Study of Microstructural Evolution in Irradiated LPBF 316SS |
Stephen Taller, et al. |
Oak Ridge National Laboratory |
September 2024 |
| Computer vision models and advanced TEM imaging for microstructures of irradiated AM316 stainless steels |
Wei-Ying Chen, et al. |
Argonne National Laboratory |
September 2024 |
| Corrosion Testing of Additively Manufactured Stainless Steel 316H in Molten Salt Environments |
Trishelle M. Copeland-Johnson, Michael E. Woods, Kyle R. Holloway, and Andrea M. Jokisaari |
Idaho National Laboratory |
September 2024 |
| Corrosion of SS 316, Inconel 617, Inconel 625 in molten chloride salt with emphasis on the speciation of Cr, Ni, and Co in molten salt matrix by XAFS |
Thomas Hartmann, Tatiana Levitskaia, Daria Boglaienko, Daniel Koury |
Pacific Northwest National Laboratory |
September 2024 |
| Fabrication of a Liner Assembly for the MARVEL Microreactor |
Frederick List, et al. |
Oak Ridge National Laboratory |
April 2024 |
| Updated ASME design correlations and qualification plan for powder bed fusion 316H stainless steel |
Mark C. Messner, et al. |
Argonne National Laboratory |
September 2024 |
| Assessment and Usage of In-Situ Monitoring Data for American Society of Mechanical Engineers Part Qualification |
Michael Sprayberry, Thomas Butcher, Ryan Dehoff |
Oak Ridge National Laboratory |
September 2024 |
| Benchmark Study Matrix for Microreactor Geometries Relevant to Multiple Developers |
Isabella van Rooyen, et al. |
Pacific Northwest National Laboratory |
September 2024 |
| Design, Fabrication, and Testing of Surveillance Test Articles for Molten-Salt Reactor Materials Degradation Management |
Xinchang Zhang, Heramb Mahajan, and Michael McMurtrey |
Idaho National Laboratory |
July 2024 |
| Acceptance criteria for in situ surveillance of MSR materials based on thermally-loaded mechanical test articles |
Mark C. Messner, Bipul Barua, Guosheng Ye |
Argonne National Laboratory |
September 2024 |
| Mechanistic Modeling of Creep and Aging for Time Extrapolation in LPBF 316 SS – LANL |
Arul Kumar Mariyappan, Laurent Capolungo |
Los Alamos National Laboratory |
October 2023 |
| Report Outlining Computed Tomography Strategy and Microscopy Approach to Qualifying AM 316 Materials |
Amir Ziabari, et al. |
Oak Ridge National Laboratory |
August 2023 |
| Prioritization of Existing Reactor Materials |
Sebastien Dryepondt, Stephen Taller, Fred List, Zackary Snow, et al. |
Oak Ridge National Laboratory |
September 2023 |
| In Situ Monitoring Assisted Large-Scale Additive Manufacturing of Mild Steel and 316 Alloys for Nuclear Applications |
Soumya Nag, Mithulan Paramanathan, Fred List, Thomas Feldhausen, et al. |
Oak Ridge National Laboratory |
September 2023 |
| Preliminary Characterization and Evaluation on FFF Manufactured 316H and ODS Steels |
Carolyne A. Burns, Saumyadeep Jana, Amrita Lall, Zachary C Kennedy, et al. |
Pacific Northwest National Laboratory |
September 2023 |
| Feasibility Studies and Downselection of New Materials and Manufacturing Technologies for Nuclear Applications |
T. S. Byun, et al. |
Oak Ridge National Laboratory |
September 2023 |
| Initial Results of Post-Process NDE Using Advanced Techniques |
Robert Montgometry, William C. Chuirazzi, et al. |
Pacific Northwest National Laboratory |
September 2023 |
| Development of process parameters and post-build conditions for qualification of LPBF 316 SS, |
Xuan Zhang, Srinivas Aditya Mantri, George I. Vukovic, et al. |
Argonne National Laboratory |
September 2023 |
| Process understanding for qualifying LPBF 316H SS |
Robin Montoya, et al. |
Los Alamos National Laboratory |
September 2023 |
| Data-Driven Optimization of the Processing Window for 316H Components Fabricated Using Laser Powder Bed Fusion |
Caleb Massey, et al. |
Oak Ridge National Laboratory |
September 2023 |
| Unified Software Architecture for Advanced Materials and Manufacturing Technologies Data Management and Processing: FY 2023 Multidimensional Data Correlation Platform |
Stephanie Cooper, William Halsey, Vladimir Orlyanchik, Vincent Paquit, Luke Scime, Zackary Snow, Amir Ziabari |
Oak Ridge National Laboratory |
September 2023 |
| MDDC Multi-Length Scale Data Architecture Contribution Report – PNNL, INL, ANL, LANL and ORNL |
Mohammad Fuad Nur Taufique, et al. |
Pacific Northwest National Laboratory |
September 2023 |
| Preliminary prediction of long-term aging and creep behavior of AM 316 SS |
Tianju Chen, Hao Deng, Mark C. Messner, Stephanie A. Pitts, Andrea M. Jokisaari, K. Dang, L. Capolungo |
Argonne National Laboratory |
September 2023 |
| Preliminary results addressing material qualification using combined ion irradiation and modeling data |
Andrea Jokisaari, Peter Baldo, Wei-Ying Chen, Yiren Chen, Dzmitry Harbaruk, Josh Hlavenka, Sourabh Bhagwan Kadambi, Jia-hong Ke, and Mathew Swisher |
Idaho National Laboratory |
September 2023 |
| Promoting the regulatory acceptance of combined ion and neutron irradiation data for material degradation in nuclear reactors |
Andrea Jokisaari, Wei-Ying Chen, Yiren Chen, Rongjie Song, and Stephen Taller |
Idaho National Laboratory |
September 2023 |
| Corrosion testing needs and considerations for additively manufactured materials in nuclear reactors |
Andrea Jokisaari, Yiren Chen, Thomas Hartmann, Vineet Joshi, Isabella van Rooyen, Rongjie Song, and Jonathan Wierschke |
Idaho National Laboratory |
September 2023 |
| ASME Code Qualification Plan for LPBF 316 SS |
Mark Messner, et al. |
Argonne National Laboratory |
September 2023 |
| Qualification Framework Evaluations, Status Quo, and Recommendations |
Isabella van Rooyen, Carl W. Enderlin, Efren J. Ponce, Ayoub Soulami, Thomas Hartmann, Subhashish Meher, Vineet V, Joshni, Mohan Nartu |
Pacific Northwest National Laboratory |
September 2023 |
| Oak Ridge National Laboratory Compilation of AMMT Quality Assurance Procedures |
Michael Russell |
Oak Ridge National Laboratory |
September 2023 |
| Initial demonstration of computer vision models for defect quantification of TEM data |
Wei-Ying Chen, et al. |
Argonne National Laboratory |
September 2023 |
| Definition of Accelerated Creep Testing Techniques for Qualification of AM Materials |
Ninad Mohale, Michael McMurtrey |
Idaho National Laboratory |
September 2023 |
| Hybrid physics-based and machine learning tools for materials assessment |
William Tanner Yorgason, Mathew Swisher, and Andrea Jokisaari |
Idaho National Laboratory |
September 2023 |
| Multiscale and Machine Learning Modeling for Additive Manufacturing |
Sudipta Biswas, et al. |
Idaho National Laboratory |
September 2023 |
| Feasibility Study of Advanced Manufacturing Techniques and Compositions of High Entropy Alloys |
Mohan Sai Kiran Kumar Yadav Nartu, Subhashish Meher, Isabella van Rooyen, Shalini Tripathi, Nathan Canfield |
Pacific Northwest National Laboratory |
August 2023 |
| AMMT FY23 HFIR Irradiation Test Matrix – Supported by the Design of a Miniature Bend Bar Irradiation Vehicle |
P. A. Champlin, C. P. Massey, A. G. Le Coq, S. A. Taller, T. S. Byun, K. D. Linton |
Oak Ridge National Laboratory |
August 2023 |
| Preliminary Report on Compositional Specification for Printed 316SS |
Peeyush Nandwana, Rangasayee Kannan, Selda Nayir, Caleb Massey, et al. |
Oak Ridge National Laboratory |
August 2023 |
| Downselection and Basic Properties of Additively Manufactured ODS Alloys |
T. S. Byun, D. A. Collins, K. B. Fillingim, T. A. Feldhausen, et al. |
Oak Ridge National Laboratory |
August 2023 |
| Report Outlining Computed Tomography Strategy and Microscopy Approach to Qualifying AM 316 Materials |
A. Ziabari et al. |
Oak Ridge National Laboratory |
August 2023 |
| Evaluation of LPBF Steels for Nuclear Applications |
Srinivas Aditya Mantri, Xuan Zhang |
Argonne National Laboratory |
July 2023 |
| Evaluation of Nickel Alloys, Manufactured through Powder Bed Fusion, for Application for Advanced Nuclear Reactors |
Michael McMurtrey, Michael Moorehead, Michael Mulholland |
Idaho National Laboratory |
July 2023 |
| Preliminary Feasibility of Printing, Microstructure Analysis and Mechanical Performance of a Down Selected Ni Alloy |
Sebastien Dryepondt, Stephen Taller, Fred List, Zachary Snow |
Oak Ridge National Laboratory |
July 2023 |
| Evaluation of printability methodologies and feasibility to down select LPBF steel and other materials for nuclear applications |
Subhashish Meher, Chinthaka Silva, Mohan Sai Kiran Kumar Yadav Nartu, et al. |
Pacific Northwest National Laboratory |
July 2023 |
| Strategic Plan: Decrease Critical Minerals Waste through Enabling Advanced Manufacturing Techniques |
Thomas Hartmann, Praveen K. Thallapally, Isabella van Rooyen |
Pacific Northwest National Laboratory |
July 2023 |
| Nondestructive property and defect characterization using X-rays and neutrons |
William C Chuirazzi, et al. |
Idaho National Laboratory |
July 2023 |
| In-situ and ex-situ characterization of ion-irradiated AM materials |
Wei-Ying Chen, Yiren Chen, Peter Baldo, Josh Hlavenka, Dzmitry Harbaruk |
Argonne National Laboratory |
July 2023 |
| Comparison of Elastic Moduli of LPBF 316H Material Using RUS Measurements and Destructive Mechanical Testing |
Robert O. Montgomery, Jared J. Gillespie, Morris S, Good, Isabella Van Rooyen |
Pacific Northwest National Laboratory |
July 2023 |
| Report on Capability Expansion towards the Development of an Accelerated Creep Test Scheme at ANL |
Xuan Zhang and Edward J. Listwan |
Argonne National Laboratory |
July 2023 |
| Development of an accelerated creep testing technique via multi-specimen loading |
Xuan Zhang, John Snitzer, Yiren Chen, Edward Listwan, Scott Poremba |
Argonne National Laboratory |
July 2023 |
| Mechanical Properties of Additively Manufactured 316L Stainless Steel Before and After Neutron Irradiation–FY23 |
T. S. Byun, A. G. Le Coq, J. W. Werden, T. G. Lach, K. D. Linton |
Oak Ridge National Laboratory |
May 2023 |
| Summary of Methodology for Mitigating Risks Associated with Licensing and Qualifying AM Nuclear Materials |
Holden C. Hyer, Daniel C. Sweeney, Christian M. Petrie |
Oak Ridge National Laboratory |
March 2023 |
| Assessment of Process Modeling Tools for Determining Variability in Additively Manufactured Parts |
Alex Plotkowski, Gerry Knapp, John Coleman, Benjamin Stump, Matt Rolchigo |
Oak Ridge National Laboratory |
March 2023 |
